Notebook batteries and its proper use

Notebook batteries and its proper use

post by http://www.battery-base.com

1, with random use of power and the power adapter. If the power cord or power adapter damage, in a timely manner with the maintenance department hp 361742-001 battery .

2, please do not use the original model with a different power cord or power adapter, or may cause damage to the computer.

The following will guide you how to connect the power adapter and the boot:

1. In the formation of a clean desktop, laptop good place;

2. The power cord is connected to the power adapter;

3. Output connector will power adapter to connect to the computer’s power supply interface;

4. The power cord is connected to 08K8199, the output voltage 100-240V AC power within the scope of the (three-outlet please ensure that reliable ground);

5. Press the power button after button to release the boot.

Cell activation

Randomly assigned by your notebook batteries for high-energy lithium-ion hp DP390A battery ,08K8194, for the first time in the use of lithium-ion batteries, the batteries may have little residual power, please exhausted during battery power. To be followed by the following method to activate the battery.

First of all, the laptop battery will charge non-stop for a long time. Tip: In the off state, charge, charge time is greater than 5 hours; boot in the state of charge, charge time is greater than 8 hours. Note: 1, in the process of charging, do not unplug an external power supply.

2, Do not free to use non-machine-specific batteries.

The battery is fully charged, can be used. The first three to use battery power to use all finished another charge. Moreover, the charging time can not be lower than the charge for the first time. In order to ensure maximum battery is activated to ensure the efficient use of hp 346970-001 battery time.

The above-mentioned process is known to activate the battery. After three complete charge and discharge,08K8196, the batteries can be used to normal.

The use of battery

When you do not use an external power supply, the computer will automatically switch to battery power supply system as a whole. The battery is fully charged after using about 3 to 5 hours (the time is based on the use of Battery Mark testing procedures under the greatest test results).

The use of the specific time will be different as a result of factors, including the LCD brightness, system power management features, applications, the use of peripheral status, a total of battery time and other factors.

When the battery or the use of part of the run, you can access the power adapter for laptop batteries. The battery state of charge through the front of the laptop battery indicator light shows. Tip: No matter whether the hp HSTNN-UB02 battery is installed in the computer, there will be the phenomenon of self-discharge (about 1% of the day).

If you do not use the computer for a long time,92P1102 , because long-term battery self-discharge and have exhausted during power loss or even, which is lithium-ion batteries due to the inherent characteristics, is a normal phenomenon. At this point should use an external power supply.

The use of an external power supply still can not boot (charging indicator light is not bright), show that the battery has entered a state of self-protection, then please shut down in the state of external power supply charge for a period of time (from 2 to 4 hours) to activate the battery so that the battery can be After the normal charge, and then use the boot. Tip: If you do not use the computer for a long time, we recommend that you unplug the battery, the battery will be kept separate. Note: If the battery does not use long-term, at least a month of battery charging and discharging a move, otherwise the hp Pavilion ZD7000 battery may have been because of failure of discharge.

Battery initialization

The use of laptop batteries after a long period of time, gradually you will find that the actual use of battery discharge time than the original time to reduce the number of discharge,92P1077, which is the lithium-ion battery memory effect.

You can remove the battery to initialize memory effect. Initialization means will be full of battery power, the power to take to do, and once again full of the process. Follow these steps to complete the initialization time:

? Make sure the computer is turned off, and then connected to an external power supply charge.

? Full power after boot. When the startup screen appears the screen, press [F2] key to enter until the BIOS setup program and let the computer stops there. Unplug the power adapter, so that the computer continued to,92P1073, drive until the battery power and not far off.

? Power adapter connected to the battery is full.

? Full use of battery power will be exhausted during electricity.

? 2-3 times more than the steps repeatedly, to the elimination of some of the memory effect, to extend hp PP2182D battery life. Tip: As the lithium-ion batteries have a certain life, when you can use an external power supply, as far as possible the use of an external power supply, to reduce the number of batteries used effectively to extend the battery life.